Strength training for the vertical jump: squat or jump? One study tested both

Do both. In a 6-week trial with 48 people, squat training added 3.3 cm to the vertical, plyometrics 3.8 cm and the two combined 10.7 cm. Strength training for the vertical jump builds the engine; jumps teach you to use it. Jump first in each session, then lift, and keep jumping in every strength block.

General information, not medical advice. Stop if you feel dizzy or unwell, and ask a professional about any health concern.

Squats or jumps for a higher vertical? One study tested both, and neither won alone. Here is what happened, what it means for your training, and the exact lifts, loads and order to use.

The trial: squats, jumps, or both

In a 1992 trial, 48 people were split into four groups: squats, plyometrics, squats plus plyometrics, and a control group. They trained twice a week for a technique week and then six weeks. Vertical jump went up in all three training groups:

GroupAverage vertical gain
Squats only+3.3 cm
Plyometrics only+3.8 cm
Squats + plyometrics+10.7 cm

The combined group improved significantly more than either single method, and later research points the same way: strength and jumping work best together.

Why strength matters: force per kilo

A jump is force pushed into the floor, divided by the mass you have to lift. That is why relative strength, not the biggest number on the bar, is what lines up with jump height.

  • In 12 college athletes, squat and power clean maxes relative to body mass correlated with jump height. Absolute maxes did not.
  • In elite volleyball players, relative strength correlated moderately with jump measures (0.53 to 0.65).

Two people who both squat 100 kg can jump very differently if one weighs 70 kg and the other 95 kg.

Who should lift first

If you are relatively weak, lifting heavy works as well as fast training. In 24 relatively weak men training three times a week for 10 weeks, heavy back squats (75-90% of max) and light jump squats (0-30% of max) raised jump power by the same amount, 17.7% and 17.6%. The squat group also gained 31% on the squat itself against 4.5%, a base they could use later.

If you are already strong, fast work pays off sooner. A 10-week study compared a stronger group (squat about 2.0 times body mass) with a weaker one (about 1.2 times). The stronger group improved jump speed faster at the halfway test; by the end, both had improved.

The practical rule: build strength first if you are new to lifting, and shift toward light, fast work as you get strong. Keep jumping all along.

Weightlifting moves beat plain lifting for the jump

Cleans, pulls and their variations train the same full-body extension as a jump. The pooled evidence:

  • 6 studies, 232 people: weightlifting raised jump height 7.7% more than no training and 5.1% more than traditional lifting, and matched plyometrics.
  • 7 studies: weightlifting +7.5% against traditional lifting +2.1%; weightlifting +8.8% against plyometrics +8.1%.
  • 16 studies, 427 people: weightlifting beat traditional lifting for the countermovement jump and was similar to plyometrics.

These lifts are technical. Learn them in person from a qualified coach before you load them. If that is not an option, jumps give you a similar effect with less to learn.

The lifts, with sets, reps and rest

LiftSets x repsRestCue
Back or front squat3-5 x 3-6 (front: 3-8)3-5 minSit down between the hips to at least thighs level, stand up as fast as the load allows
Trap-bar deadlift3-4 x 3-53-5 minPush the floor away, flat back, stand up fast
Split squat, rear foot on a bench3-4 x 5-8 per leg90 s-3 minLower until the front thigh is level, drive up hard
Romanian deadlift2-3 x 6-82-3 minSoft knees, hips back until the hamstrings are tight
Hip thrust2-3 x 6-82-3 minShoulders on a bench, hips up until the trunk is level, pause
Calf raise2-3 x 8-1245-90 sRise as high as you can, pause, lower slowly

Pick two or three per session: one squat pattern, one hinge, and calves or a single-leg lift. For the calf question in detail, see do calf raises help you jump higher.

How heavy: the loading rules

The resistance training position stand gives clear ranges:

  • New to lifting: loads you can lift 8 to 12 times, 2 to 3 days a week.
  • Experienced: a wider 1 to 12 rep range over time, with emphasis on heavy sets of 1 to 6 and 3 to 5 minutes of rest.
  • Power: light loads, 0 to 60% of your max for the legs, moved as fast as possible, 3 to 5 sets.
  • Progress: when you can do 1 or 2 reps more than the target, add 2 to 10% to the bar.

On most sets, stop with two or three clean reps left in the tank. You are training to jump, and the jumps need fresh legs too.

Order and spacing: jump first, keep jumping

In a session: warm-up, landing or technique work, fast jumps, then strength, then mobility. The position stand puts higher-intensity, multi-joint work first, and maximal jumps are the highest-intensity thing you will do all day.

Across the weeks: never drop the jumps during a strength phase. In a computer simulation of jumping, stronger leg muscles driven by the old movement pattern actually jumped lower, and only jumped higher once the control was re-tuned. The authors suggest practising jumps alongside strength work so your body learns to use the new force.

Across the week: keep the two hardest leg days apart, and avoid heavy squats and hard plyometrics for the same legs on consecutive days.

Two sample days

These follow the first block of a gym strength-and-power template, with loads around 75-85% of your max and 2-3 reps in reserve.

Day A: warm-up, 2 x 10 pogo hops, 3 x 3 jumps to a target with full rest, back squat 4 x 5, Romanian deadlift 3 x 8, calf raise 2 x 12.

Day B: warm-up, 3 x 4 box jumps (step down), split squat with the rear foot on a bench 3 x 6 per leg, hip thrust 3 x 8, calf raise 2 x 12.

No gym? Bodyweight squats, split squats, step-ups, single-leg sit-to-stands and glute bridges carry you a long way. See vertical jump exercises and the full vertical jump training program for how weeks progress, or start from how to jump higher.

Know what your legs need

Strength or speed first is a question your own numbers can answer. Vertical Jump builds a jump profile that rates Power, Bounce and Strength. The one that lags becomes your focus, and the plan trains it first inside an 8-week Foundation, Build or Performance programme matched to your level. Each lift and jump comes with sets, reps, a short cue and a moving figure.

Every 4 weeks, a full test retakes your vertical, your power from a crouch, your bounce over 10 hops and a strength self-test, so you see whether the lifting is reaching the jump.

Heavy lifting needs sound technique: get coached in person if you are new to the barbell, and stop any set that causes pain.

Questions people ask

Does squatting make you jump higher?

It can. In 24 relatively weak men, 10 weeks of heavy squats raised jump power as much as jump-squat training did. But squats alone gave the smallest gain in a 6-week trial; squats plus jumps did best. Lift and keep jumping, so your body learns to use the new strength.

How much should I squat to jump higher?

Aim for a squat of about 1.5 times body weight before the most intense jumps, such as depth jumps. Strength relative to body weight tracks jump height better than the raw number on the bar. Beginners start with sets of 8 to 12 reps they can control.

Should I lift or do plyometrics first in a session?

Jumps first. Fast, maximal jumps need fresh legs, and the resistance training position stand puts higher-intensity, multi-joint work before lower-intensity work. A typical order is warm-up, landing or technique work, jumps, strength, then mobility.

Can weight training make me jump lower?

It can for a while if you stop jumping. A computer simulation found that stronger muscles lowered the jump until coordination adapted. In practice, keep a few full-effort jumps in every strength phase and avoid stacking heavy legs and hard plyometrics on back-to-back days.

Sources

Made by EASYTECH, who also make Vertical Jump.